No quick matches. Press enter to see full results.
Public sector · Transportation
Field-generated reports from dozens of agencies pile up before they ever reach a statewide safety system, so a real hazard waits in the backlog instead of surfacing in the data.
The short answer
States reduce crash report backlogs by capturing reports from every submitting agency into one intake process, mapping the data to a standard format before it reaches an analyst, and delivering it to the statewide safety data system automatically. Crash report processing done this way means a reportable hazard surfaces in the data in days, not after a years-long reporting delay.
Crash report and safety data processing is the field-generated incident reports, citations and supplemental records a state or local agency collects after a motor vehicle crash, standardized and delivered into the statewide system used for traffic safety analysis, funding decisions and federal reporting.
Who it’s for
DOT safety divisions, state police records units and local law enforcement agencies that submit crash reports.
What changes
Analysts work from current, standardized data instead of a growing backlog of unprocessed reports.
Proof
A 180,000-report backlog cleared, with 90%+ of fields indexed automatically, in 90 days. See the work
A week after the crash
It breaks down in the gap between a report being filed and that report becoming usable data.
From a state safety data office
A trooper files a crash report on scene using a department-issued form. A county sheriff’s office two counties over files a similar report on paper, its own layout, its own abbreviations. Both are meant to describe the same kind of event, to the same statewide standard.
Weeks later, both reports are still in a stack waiting for a records clerk to key them into the state system field by field. A contributing factor on one report is miscoded because the clerk typed the nearest-sounding category instead of confirming it.
By the time a cluster of similar crashes on the same stretch of road would be visible in the data, the reports describing them are still in the queue.
The document pattern
Every crash report moves through three stages: field report intake, data standardization and statewide analysis. Each stage has a friction point, and each friction point has a downstream cost.
Friction
Paper and PDF crash reports arrive from dozens of law enforcement agencies, each with its own form and submission method.
Cost: Delayed visibility
A reportable crash can take weeks to reach the state system that tracks it.
Friction
Staff key report fields by hand into a format that matches the state’s safety data system.
Cost: Inconsistent data
Manually keyed fields drift from MMUCC standard definitions, weakening comparisons across agencies.
Friction
Analysts wait on a backlog of unprocessed reports before a safety trend becomes visible.
Cost: Slower safety response
A roadway hazard or vehicle defect takes longer to surface in the data that would flag it.
At every stage above, a person is still moving the report by hand.
Why now
Federal funding and a real national data standard have both arrived at the same time.
That delay makes it hard to catch a roadway hazard or vehicle defect before more crashes happen. Source: NHTSA.
NHTSA is offering up to $350 million in grants under the Bipartisan Infrastructure Law for states to upgrade and standardize crash data systems, with $171 million already awarded to 19 states and territories.
Source: NHTSA State Electronic Data Collection grant program.
The current average delay between a crash and usable statewide data is roughly two years, which is too slow to catch an emerging safety risk before more crashes happen.
Source: NHTSA.
The Model Minimum Uniform Crash Criteria, updated in 2024, gives every agency a shared data definition to report against, but only if intake is structured enough to capture it consistently.
Source: MMUCC 5th Edition, 2024.
How we help
We’re the content foundation layer between your content platform and your safety data system, so every report is captured, standardized and delivered before an analyst needs it.
We capture crash reports from state police, county and municipal agencies in whatever format they submit, paper or electronic, into one managed intake process.
Document Scanning Services →Box AI Extract Agents pull key fields from each report and map them toward MMUCC-aligned data definitions, scoring each for confidence. Only low-confidence fields go to human validation.
Data Refinement Services →Validated reports land in Hyland OnBase or Box, indexed with access controls, retention and an audit trail. We deploy and manage the platform or work inside yours.
Content Management Solutions →Box Automate delivers standardized data to the statewide safety system on a running basis, instead of waiting on a batch to be compiled by hand.
Data-Driven Workflow and Automation →| Stage | Manual process | With DataBank |
|---|---|---|
| Intake | Paper and PDF reports arrive from dozens of agencies in inconsistent formats | One managed intake process capturing every submitting agency’s reports |
| Refine | Staff key report fields by hand to match state data definitions | Fields extracted and mapped to MMUCC-aligned data, with low-confidence fields sent to human validation |
| Manage | Reports sit across agency file shares and paper archives | One governed record per report in Hyland OnBase or Box, with retention and an audit trail |
| Activate | Analysts manually compile reports before a trend is visible | Metadata-driven routing delivers standardized data to the safety data system on a running basis |
By role
A crash data modernization decision crosses program, IT, compliance, leadership and procurement. Each role starts with a different question.
Highway safety office and state police records directors
What you’re weighing
Backlog, data timeliness and how closely reported data matches the MMUCC standard.
How DataBank addresses it
We take intake, indexing and field validation off your records staff’s desks, so a reportable crash reaches the state system in days, not months.
Request a crash data workflow assessment →IT and systems integration leads
What you’re weighing
Integration effort and whether this replaces or connects to the safety data system already in production.
How DataBank addresses it
We integrate with the crash records and safety data systems your agency already runs; we don’t replace them.
Talk to a public sector specialist →Compliance, records and audit leads
What you’re weighing
Data integrity and whether a record can be traced back to its submitting agency.
How DataBank addresses it
Every report carries its source agency and handling history, and every access or change on the platform is logged.
Read about security at DataBank →Agency and department executive sponsors
What you’re weighing
Whether modernizing crash data intake qualifies for federal grant funding and measurably improves safety reporting.
How DataBank addresses it
The same approach has cleared a 180,000 crash-report backlog for a state services agency with 90%+ of fields indexed automatically, in 90 days.
See how agencies have done it →Procurement and contracting officers
What you’re weighing
How fast this can move from decision to purchase order, and whether grant funding timelines apply.
How DataBank addresses it
DataBank services are available through approved cooperative and state contract vehicles, which can shorten the path from decision to purchase order.
See purchasing contracts →Outcomes
Safety analysts start from current, standardized data, so trends surface before more crashes happen.
Crash data reaches the statewide system in days, not months, so an emerging hazard surfaces while it still matters.
A 180,000-report backlog was cleared with 90%+ of fields indexed automatically.
Fields are mapped toward MMUCC data definitions instead of drifting across each agency’s own keying habits.
Every report carries its source agency, handling history and link to the record it supports.
Agency experience
These two DataBank engagements show the capture, standardization and delivery work crash report processing depends on.
Public sector backlog clearance
Challenge. A backlog of more than 180,000 crash reports.
Result. Backlog cleared, 90%+ of fields indexed automatically with human validation, peak efficiency in 90 days.
See the Case management solution →Public safety agency experience
Challenge
An outdated system left wrecking and towing case records scattered across three repositories.
Result
OnBase ECM implemented in five months, cutting documentation repositories from three to one.
Read the case study →Security and compliance
Crash reports stay under documented custody from the submitting agency to the statewide record, with access controls, audit trails and retention enforced on the platform.
Chain of custody
Every handoff logged, paper and digital, from the submitting agency to the statewide record.
Access controls
Role-based permissions, so staff see only the jurisdictions and reports they work.
Audit trails
Every view, edit and routing step recorded.
Retention
Retention schedules applied on the platform and enforced by rule.
Hosting
Your platform, your cloud tenant or The DataBank Cloud, agreed with your IT team at scoping.
Frameworks and certifications
For procurement
You can buy through approved cooperative and state contract vehicles, which can shorten the path from decision to purchase order.
Available vehicles
Texas DIR-CPO-5913, and the OMNIA Partners cooperative portfolio (U.S. Communities, National IPA, NCPA). Several more state-specific vehicles are in progress — see the full list below.
FAQ
It removes the manual steps between a report arriving and it reaching the state safety data system. Reports from every submitting agency are captured, validated and mapped toward MMUCC data definitions automatically, so analysts work from current data instead of a growing backlog.
Yes. Paper and PDF reports from dozens of submitting agencies are captured into one managed intake process, classified and delivered into your content platform in a consistent format.
No. Your safety data system stays the system of record. We integrate capture, validation and workflow with the system your analysts already use, and store documents in a content platform such as Hyland OnBase or Box.
NHTSA’s State Electronic Data Collection grant program funds upgrading and standardizing crash data systems. Whether a specific engagement qualifies depends on how the work is scoped in your state’s grant application; a public sector specialist can walk through what typically applies.
In many cases, yes. DataBank services are available through approved cooperative and state contract vehicles. Our purchasing contracts page lists current vehicles, and a public sector specialist can confirm which ones apply in your state.
Start with this week
Bring your intake channels, your current backlog and the safety data system you run. A public sector specialist will walk through where reports stall and what it would take to fix it.
Talk to a public sector specialist